My dome lights blink on and off in my 98 jeep GC, and they'll sometimes stay on after I turn my car off. I don't want to kill my battery, is there anyway to get them to stay off?|||All you have to do is remove the dome light bulbs. Then they definately wont come on. Good luck!|||Hold the reset button in an turn key to run not start when u do this then releast the reset button an the G.E.M. modual will go through a series of test and u can watch everything move..when it stops be ready to write down what ever codes it dissplayes..more than likly it a sticking door switch, try lubercating inside door latch with WD-40 and go from there...good luck|||It's probably a bad door switch, most likely the driver's door. It should just thread right out with a socket. if you want to be sure that you don't drain your battery until you can fix it you can just pull the dome light fuse out.|||close the door|||simple and handy... the switch from the dome light has 3 positions (99% of the cases), (and your 98 jeep is surely in that 99%)
let's name those positions 0,1 and 2.
0 means off
1 means "dome lights on (ALWAYS)"
2 means "dome lights on when one/more door/s is/are open/ed"
most of the people use the dome lights in position 2. however in your case it's not suitable to leave the switch on 2. try using 0 and when you need light in your car (to search the keys, mobile phone, etc) use 1 but don't forget after you found your keys, mobile phone, etc to switch it back to 0.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment